# Stratasys Support Cleaning Apparatus

To Drain:

The bath will gradually become cloudy and less effective over time. That’s when it should be drained and refilled. There is a tube on the back to drain it into the sink.

To Refill:

Retrieve four EcoWorks A-B Cleaning agent packets in the cabinet under the Ultimaker and pour the contents into the tank. Then, fill it with water (you can use the eyewash) between the MIN / MAX lines. Turn on the power switch (located just behind the power light) – it should start heating up the tank and the cleaning pods will eventually dissolve. The tank has a timer that you can adjust, it’s ok to leave on for days at a time.

Contact Christina Chrestatos (<chrestat@up.edu>) for support

SDS: <https://rndtechdev.wpengine.com/wp-content/uploads/2022/12/msds-ecoworks-tablets-us.pdf>

<br>